Load data for .308 Marlin Express + .308 | 110gr | Speer SSP

Recommended Powder(s):

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.308 \| 110gr \| Speer SSP
Manufacturer SKU:	1855
Bullet Weight:	110gr \| 7.1g
Bullet Diameter:	0.308" \| 7.82mm
Bullet Length:	0.810" \| 20.6mm
Caliber:	.308 Marlin Express load data
Case Length (l3):	1.910" \| 48.5mm
Cartridge Length (C.O.L.):	2.571" \| 65.3mm
Seated Depth:	0.149" \| 3.8mm
Shank Seated Depth:	0.149" \| 3.8mm
Case Capacity:	51.0 Grains of Water \| 3.31 cm³
Primer Size:	Large Rifle (LR)
Max. allowed Pressure:	47863 psi \| 3300 bar
LID:	LID_B6142_C397
Last updated:	2025-01-01

Load data for 76 loads in caliber .308 Marlin Express with .308 | 110gr | Speer SSP bullet and 38 powder(s). The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AR 2207	<<locked>>	86%	41771	87%	**30	100%
ADI AR 2219	<<locked>>	90%	42322	88%	**76	96%
Accurate 2015	<<locked>>	96%	42090	88%	**46	98%
[Accurate 2460]*	<<locked>>	94%	42496	89%	**43	93%
Accurate 2495	<<locked>>	97%	34664	72%	**77	96%
[Accurate 2520]*	<<locked>>	97%	38276	80%	**17	93%
Alliant AR-Comp 👍	<<locked>>	97%	38986	81%	**56	99%
Alliant Reloder-10x 👍	<<locked>>	93%	42685	89%	**76	99%
Alliant Reloder-7	<<locked>>	85%	42699	89%	**04	99%
Baschieri & Pellagri 106	<<locked>>	89%	42757	89%	**71	97%
[Hodgdon Benchmark]*	<<locked>>	95%	42134	88%	**84	92%
[Hodgdon CFE BLK]*	<<locked>>	85%	42772	89%	**41	91%
Hodgdon H322	<<locked>>	96%	42598	89%	**79	96%
Hodgdon H335	<<locked>>	90%	42380	89%	**76	95%
Hodgdon H4198	<<locked>>	87%	43018	90%	**67	96%
Hodgdon TrailBoss	<<locked>>	96%	29631	62%	**50	100%
[IMR 3031]*	<<locked>>	97%	33286	70%	**12	94%
IMR 4198 👍	<<locked>>	91%	42786	89%	**30	99%
[Lovex D073.4]*	<<locked>>	93%	43018	90%	**36	93%
[Lovex D073.5]*	<<locked>>	94%	42148	88%	**36	93%
Norma 200 👍	<<locked>>	89%	42917	90%	**66	99%
[Norma 202]*	<<locked>>	96%	36956	77%	**54	93%
ReloadSwiss RS 14	<<locked>>	95%	29037	61%	**83	100%
[ReloadSwiss RS 40]*	<<locked>>	93%	42888	90%	**53	94%
[Rottweil R 901]*	<<locked>>	97%	41205	86%	**13	94%
SNPE Vectan BA6 1/2	<<locked>>	84%	42989	90%	**97	100%
SNPE Vectan SP 10	<<locked>>	90%	42902	90%	**82	95%
[SNPE Vectan Tubal 3000]*	<<locked>>	97%	41046	86%	**41	94%
[SNPE Vectan Tubal 5000]*	<<locked>>	97%	32880	69%	**64	92%
[Somchem S321]*	<<locked>>	95%	42598	89%	**63	92%
Somchem S335	<<locked>>	97%	39378	82%	**38	95%
Vihtavuori N120	<<locked>>	89%	42322	88%	**90	100%
Vihtavuori N130	<<locked>>	94%	42308	88%	**97	99%
Vihtavuori N133	<<locked>>	97%	37478	78%	**05	96%
[Vihtavuori N140]*	<<locked>>	97%	35027	73%	**76	93%
[Vihtavuori N530]*	<<locked>>	95%	42134	88%	**43	91%
[Vihtavuori N540]*	<<locked>>	97%	35114	73%	**05	92%
[Winchester 748]*	<<locked>>	96%	42670	89%	**92	92%

Max Load - Barrel Length: 23.60''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AR 2207	<<locked>>	81%	35476	74%	**95	100%
[ADI AR 2219]*	<<locked>>	81%	31589	66%	**03	92%
[Accurate 2015]*	<<locked>>	81%	26600	56%	**49	92%
[Accurate 2460]*	<<locked>>	89%	36158	76%	**02	90%
[Accurate 2495]*	<<locked>>	85%	23409	49%	**43	90%
[Accurate 2520]*	<<locked>>	93%	33156	69%	**85	90%
[Alliant AR-Comp]*	<<locked>>	81%	23801	50%	**97	92%
Alliant Reloder-10x	<<locked>>	81%	29544	62%	**51	95%
Alliant Reloder-7	<<locked>>	81%	37463	78%	**89	98%
[Baschieri & Pellagri 106]*	<<locked>>	81%	32489	68%	**35	93%
[Hodgdon Benchmark]*	<<locked>>	90%	37130	78%	**69	90%
[Hodgdon CFE BLK]*	<<locked>>	83%	39218	82%	**66	90%
[Hodgdon H322]*	<<locked>>	84%	29182	61%	**28	90%
[Hodgdon H335]*	<<locked>>	82%	31879	67%	**07	90%
[Hodgdon H4198]*	<<locked>>	81%	35737	75%	**03	93%
Hodgdon TrailBoss	<<locked>>	81%	23598	49%	**06	100%
[IMR 3031]*	<<locked>>	91%	27949	58%	**41	90%
IMR 4198	<<locked>>	81%	31937	67%	**71	97%
[Lovex D073.4]*	<<locked>>	88%	35839	75%	**79	90%
[Lovex D073.5]*	<<locked>>	89%	35853	75%	**95	90%
Norma 200	<<locked>>	81%	33475	70%	**43	97%
[Norma 202]*	<<locked>>	91%	30893	65%	**94	90%
ReloadSwiss RS 14	<<locked>>	81%	23235	49%	**39	100%
[ReloadSwiss RS 40]*	<<locked>>	87%	34185	71%	**53	90%
[Rottweil R 901]*	<<locked>>	88%	31647	66%	**77	90%
SNPE Vectan BA6 1/2	<<locked>>	81%	39088	82%	**28	100%
[SNPE Vectan SP 10]*	<<locked>>	81%	31459	66%	**03	90%
[SNPE Vectan Tubal 3000]*	<<locked>>	88%	31140	65%	**02	90%
[SNPE Vectan Tubal 5000]*	<<locked>>	92%	28950	60%	**52	90%
[Somchem S321]*	<<locked>>	92%	38072	80%	**67	90%
[Somchem S335]*	<<locked>>	86%	28442	59%	**56	90%
Vihtavuori N120	<<locked>>	81%	33388	70%	**00	100%
[Vihtavuori N130]*	<<locked>>	81%	28239	59%	**52	94%
[Vihtavuori N133]*	<<locked>>	83%	25048	52%	**48	90%
[Vihtavuori N140]*	<<locked>>	92%	30879	65%	**61	90%
[Vihtavuori N530]*	<<locked>>	93%	38682	81%	**64	90%
[Vihtavuori N540]*	<<locked>>	93%	31647	66%	**07	90%
[Winchester 748]*	<<locked>>	92%	37492	78%	**67	90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data